Skip to content
Afi Planner

What does each delivery stop cost? A cost per stop calculator

Updated

Short answer

Cost per delivery stop = (driver labor + vehicle costs + overhead) ÷ completed stops, all for the same day, week or month. Example with invented numbers: 10 vans, each driver paid 9 hours at $25 plus 12% employer costs ($252.00), 120 miles at $0.70 plus $45 fixed per van ($129.00), and $250 a day of fleet overhead come to $4,060 a day; with 60 completed stops per van (600 in all), that is $4,060 ÷ 600 = $6.77 per stop. Enter your own numbers in the calculator below: the result is only as good as what you put in.

Not a market rate or a price to quote: it gives your own cost from your own inputs, for an average day, and a failed delivery that needs a second visit is not in it unless you add that visit’s cost.

Cost per stop calculator

Every value below is an invented example, not an industry figure: replace each one with your own. The result updates as you type, and nothing you type leaves this page.

Cost per completed stop

$6.77

Driver labor
$2,520.00
Vehicles
$1,290.00
Overhead
$250.00
Total per day
$4,060.00
Completed stops per day
600

How it works in Afi Planner

The formula and its assumptions

The calculator works out one day for the whole fleet. Use numbers from the same day, or from an average day, on every line.

  • Driver labor = vans × paid hours × hourly wage × (1 + employer costs %). Paid hours run from leaving the depot to returning and unloading; employer costs are payroll taxes, workers’ compensation and benefits
  • Vehicles = vans × (miles × cost per mile + fixed cost per van per day). Fuel, maintenance and tires scale with miles; insurance, lease or depreciation and registration are a cost per day
  • Overhead = one daily figure for the whole fleet: routing software, drivers’ phones, a share of depot space and of dispatch time. It is spread over more stops as the fleet grows
  • Cost per stop = (labor + vehicles + overhead) ÷ (vans × completed stops per van). Count only delivered stops
  • It assumes one driver per van, paid by the hour. For drivers paid by the day, set paid hours to 1 and the wage to the day rate

Worked examples by fleet size (invented numbers)

These numbers are invented to show the arithmetic. They are not benchmarks, averages or results from any customer. The larger fleets here also have denser routes (more stops per van, fewer miles), and that is what moves cost per stop most: a bigger fleet on sparse routes would not get the same number. The 10-van column is what the calculator opens with.

  • 3 vans: ($645.12 labor + $366.00 vehicles + $90.00 overhead) ÷ 135 stops = $8.16 per stop
  • 10 vans: ($2,520.00 labor + $1,290.00 vehicles + $250.00 overhead) ÷ 600 stops = $6.77 per stop
  • 25 vans: ($6,552.00 labor + $2,700.00 vehicles + $500.00 overhead) ÷ 2,000 stops = $4.88 per stop
Paid hours × hourly wage3 vans: 8 h × $2410 vans: 9 h × $2525 vans: 9 h × $26
Driver labor, with 12% employer costs3 vans: 3 × $215.04 = $645.1210 vans: 10 × $252.00 = $2,520.0025 vans: 25 × $262.08 = $6,552.00
Vehicles: miles × $0.70 + $45 fixed3 vans: 3 × (110 mi) = $366.0010 vans: 10 × (120 mi) = $1,290.0025 vans: 25 × (90 mi) = $2,700.00
Fleet overhead per day3 vans: $90.0010 vans: $250.0025 vans: $500.00
Total per day3 vans: $1,101.1210 vans: $4,060.0025 vans: $9,752.00
Completed stops3 vans: 3 × 45 = 13510 vans: 10 × 60 = 60025 vans: 25 × 80 = 2,000
Cost per stop3 vans: $8.1610 vans: $6.7725 vans: $4.88

What the calculator leaves out

It is a one-day estimate from averages, so some costs your books will show are not in it.

  • Failed deliveries: a stop delivered on the second try costs two visits. Add the extra visits to the cost, not to completed stops
  • Overtime and uneven days: use an average day, or work out a busy day and a quiet day separately
  • One-off costs such as a new van or a large repair: spread them over the days they cover

Where Afi Planner fits

Afi Planner is route planning and delivery management software for local delivery teams, made by Afi Labs. Its analytics include a Cost per stop card that prices each route at your own cost per hour and per mile, using the hours and miles drivers really drove where the driver app measured them, and divides by delivered stops; fixed costs and overhead are in it only if you build them into those two rates.

Frequently asked questions

Is the result a benchmark for cost per stop?

No. The calculator opens with invented example values. The result is your own cost only once every input is your own.

Why does a bigger fleet show a lower cost per stop in the examples?

Because the examples give the bigger fleets denser routes and spread the fleet overhead over more stops. Stops per van and miles move the result far more than fleet size alone.

Should I use planned or actual hours and miles?

Actual ones, from timesheets, fuel cards or GPS, when you have them. Planned hours and miles understate the cost when the day runs long.

Does the calculator send my numbers anywhere?

No. It runs in your browser, and nothing you type is sent or stored.

More answers

Answers →

Measure cost per stop on your real routes

Price your routes at your own hourly and per-mile rates on a 3-month free trial, no credit card.

Questions about your setup? Talk to sales